:	May 4, 2004

.

Disconnect the battery ground cable.

.

Remove the plenum chamber panel.

.

Remove the headlamp assembly.

.

Remove the fender splash shield.

.

Remove the fender moulding.

.

Remove the fender lower moulding.   Release the 4 clips.

.

Remove the fender air intake grille.   Release the 4 clips.   Remove the air ducting.

.

Remove the front fender.   Remove the 6 Torx bolts.   Remove the nut.

.

:   Do not disassemble further if the component is removed for access only. Remove the fender rear trim.   Remove the 3 clips.

.

Install the fender rear trim.   Secure in the 3 clips.

.

Install the front fender.   Install the bolts and tighten to 10 Nm (7 lb.ft).   Install the nut and tighten to 10 Nm (7 lb.ft)

.

Install the fender air intake grille.   Install the air ducting.

.

Install the lower fender moulding.   Secure in the clips.

.

Install the fender moulding.

.

Install the fender splash shield.

.

Install the headlamp assembly.

.

Install the plenum chamber panel.

.

Connect the battery ground cable.